The Composition And Attributes of Dual-Channel Diverter Valve

The Composition And Attributes of Dual-Channel Diverter Valve

Directional valves are employed to change the circulation direction of powder plus granular products in pneumatic conveying systems and may be equipped with various options such as single channel, dual channel or even both simultaneously depending on their recommended application.

There are two channels inside double-channel diverter valve, that are used to divert the solids flowing from the pneumatic conveying system and also the solids in the dilute-phase or maybe dense-phase conveying lines. Available in a considerable number of sizes, it features high-quality design features it is patented; its popularity spans industries just like plastic manufacturing, chemical manufacturing, mineral mining and meal manufacturing.

Dual-channel diverter valves start using a removable wedge-shaped plate around its center that rests on the central channel. It rotates together with its rotating plate, directing product towards weighing tank or avoid pipe; users can easily adjust its position through turning the handle, but it locks to prevent animal operation and product movement reversal.

Dual-Channel Diverter Valve Dual-channel devices enable product to flow directly to a weigh tank or avoid channel while maintaining the flow rate constant for the duration of calibration intervals, significantly reducing the uncertainty associated with calibrating diverter switches in addition to aiding in flow meter Get more accurate ends up with the app.

The dual-channel diverter control device provides superior wear security by keeping particles out of your rotor area and better perception of material flow compared for you to other diverter valves; functions newly developed wear-resistant components; while still being super easy to maintain. Additionally, the valve has decreased pressure drop and simplifies maintenance due to low maintenance costs.

The dual channel diverter valve is made from lightweight yet strong LM25 grade aluminum through a comprehensive die casting process, with all product contact surfaces lined with 316 metal tubing for product phone surface lining and FDA accepted silicone seals as Ordinary seals. Available in a large number of sizes and can be modified to create explosion-proof designs.

Before by using a dual channel diverter valve, it is critical to ensure the hopper is wholly filled. Otherwise, leaks may occur and result in lost revenue. For ideal returns, it is recommended to set up a booster pump in addition to connect it directly into the diverter valve on that diverter panel. For best performance, the booster pump needs to have a higher pressure rating compared to annular BOP and be provided with a vent line of at the very least 10 inches with a pair of minimum ID side boutiques of 10 inches every single. Integrating pumps into diverter cells can significantly reduce give back losses, provided the pressure is maintained within acceptable parameters to shield surface equipment from ruin from surge pressures. Moreover, the pump must automatically banned when the diverter control device closes - otherwise enhanced wellbore and surface pressure could cause return water loss or maybe crack formation, negatively impacting bottom lines and sales.


T200 Series Dual Channel Diveriter Valve Valves